R.F 300x4 wiring in Tweeters!

  • Help support Chopped Baggers :

Josh1

Well-Known Member
Messages
437
Location
Palm Shores FL.HX
So I took your guys advice and I am going to put tweeters in the mirror holes.
Got a nice set of JBL tweeters, going to tackle this in the a.m
My question is the amp is 4 channel so I will hook the tweeters up on there own channel, and the R.F 6 1/2 fairing speakers up on the other channel.
Now since using stock H.K radio I solder the speaker wires going to the stock speakers to the molex input wires and plug into amp, that gets me the L/R channel for the 6 1/2 speakers, now if I wanted to add the tweeters to the other channel I have the molex connector how do I tap into the oem for remaining channel.

Thanks in advance you guys are a huge help!
 

Bill

I used to own some shit!
Messages
7,115
Location
Omaha NE
You should be able to just connect them to the amp and set the filter to high.

Sent from my ADR6400L using Tapatalk 2
 

crutter

Site Supporter
Messages
844
Location
Frederick, Md
No need to tap into the head unit. Connect the green/purple molex to the tweeters. Plug it in. Set the gains and the crossover. Then enjoy
 

Josh1

Well-Known Member
Messages
437
Location
Palm Shores FL.HX
Crutter they are all good and rocking!
Even made a sexy bracket to space it off the radio for air movement!
Thanks for your help bro!
Now all I need is to get the tweeters rocking
 
Top