Help (yaffe oem monkey bars 16")

  • Help support Chopped Baggers :

crutter

Site Supporter
Messages
844
Location
Frederick, Md
I used 4 pull strings per side. Broke the wire bundle up into 1/4's and slowly pulled each one thru while pushing on the other end. Lots of liquid dish soap int the bars and on the wires. The best piece of advice I can give you is if you experience issues walk away. Come back later with a fresh head.
 

Baddd bagger

Moderator and Buddy.
Messages
5,046
Location
North jersey
We put those on my friends bike and he's right if u get pissed walk away, also use dish soap and lube up the wires it will greatly help going up over the point in the bars
 

Bill

I used to own some shit!
Messages
7,115
Location
Omaha NE
Non TBW shouldn't be any trouble. That means you'll have 12 wires on each side.

Using a vacume, pull some string through the bars to pull the wire in. Push, pull, push, pull...

Non TBW should be a piece of cake. I did my left side in 3-5 minutes "12 wires on left." The TBW bikes have 18 on the right, a real pain in the ass...

Sent from my ADR6400L using Tapatalk 2
 

BIG TIME BAGGER

Well-Known Member
Messages
824
Good luck man I did some 16 yaffes on a RK tbw and it was a bitch. Had to do the right side 2 because I popped a fuse and thought it was in the wiring. I'm sure non tbw will be easy enough tho, good luck it'll be worth it in the end
 

Latest posts

Top