Help with my replacing my brake arm.

[ASAP]

I ordered a new Arlen Ness Brake arm for my 2000 Electra Glide. It's coming in tomorrow so I thought i'd get a jump on the install by removing everything now.

I have the floorboard off, and the bolt that holds in the Arm on but, on the backside there is a very stubborn Pin that won't seem to budge that was held in place by a wire clip. I have the wire clip removed but, again the pin will not budge.

I really don't want to remove the exhaust but the pin won't budge.

 

[bagger specialties]

book says to to support master cylinder and pedel assembly in vise and tap pin out with a brass drift punch. or try driving it out from under the bike if you know what i mean.