• Help support Chopped Baggers :

Handlebar wireing ?

Buggy

One of THE 150!
To start I feel like dumbass asking ,I have changed and internally wired over 30 sets of bars, but I cant seem to get my plugs to plug back into the connector,this is the first time with this style pins. The wires are in the proper place but the plug won't go that last 1/8/inch, am I missing something?
 

slothy

Balls
dscn0762z.jpg

dscn0761t.jpg
 

Attachments

  • dscn0761t.jpg
    dscn0761t.jpg
    56.7 KB · Views: 48

QuikHD

One of THE 150!
I had the same problem. I had the pins in backwords. Pull one back, if it comes back out, chances are its in backwords. When you push them in, you should hear a slight click.
 

Buggy

One of THE 150!
pics

are my pins out to far? the pliers are pointing to where the connector stops going in , it wont go in till it clicks together.IMG_20120120_203614.jpgIMG_20120120_203715.jpg
 

Bill

I used to own some shit!
Make sure the white piece is pulled out when you put the pins in, and pushed back in once you have all the pins installed.



Sent from my ADR6400L using Tapatalk
 
Top