Recent content by DRAGO'S BIKE WORKS

  • Help support Chopped Baggers :
  1. DRAGO'S BIKE WORKS

    Aerocharger Review

    Here are some pics of a 66 series on my 124 Dragos turbo engine
  2. DRAGO'S BIKE WORKS

    engine mods with a turbo what are you running

    We supply many parts to many of the small shop and big shops and the guys in TV land. From injectors to building motors for them etc., if you guys ever have questions phone call is free I don't spend much time on forums very busy here. I built 124" motor for my own 2015 road glide for Aero...
  3. DRAGO'S BIKE WORKS

    engine mods with a turbo what are you running

    When building a motor for turbo or supercharger you don't just want to mix parts and pray that it works. You can see we have been doing this for many years from 140 hp -600 hp I have spent years and lots of money developing parts . Here are a few pics blower/ turbo pistons
  4. DRAGO'S BIKE WORKS

    Sold/Expired Drago 570 turbo cam - No Longer Available

    570 lift intake and exhaust. TDC 210 intake 187 exhaust Duration 252/260 If you have any questions on cams please call me. 815-765-1790 These cams have made over 180/200 HP easy.
  5. DRAGO'S BIKE WORKS

    how bad is this cam wear?

    It's hard to see pics any groves or pitting
  6. DRAGO'S BIKE WORKS

    engine work for a turbo

    Dragos 107 stage 3 Trask turbo9/10 psi boost
  7. DRAGO'S BIKE WORKS

    110 bolt-on kit

    This new bolt in kit is a Joke in My OP. We did this few years back. We called it the Poor mans 110 kit. Machined spigot down to fit stock cases bore. Had custom piston made. Guess what happened few thousand miles later they would crack. The spigots are so thin., thinner than 107 kit. And think...
  8. DRAGO'S BIKE WORKS

    Thundermax 2/3 bar map sensor - Boost gauge

    Guys been doing this a long time now and have tested both ways. The best place to put a map sensor ins behind throttle body blade. It gets true readings. Pressure before the blade will give you false readings on vacuum. If any one wants to try this drill and tap a line in front of blade and...
  9. DRAGO'S BIKE WORKS

    2014 SG Cam choices?

    This cam requires pushrods adjustable We can deal going on for 850$ Dragos cams S&is pushrods S&S lifters Timken koyo bearings Gaskets cams gaskets lifter block gasket and oring With a very good exhaust and tune 92/96hp 107/111 tq
  10. DRAGO'S BIKE WORKS

    2014 SG Cam choices?

    Dragos 565 cams
  11. DRAGO'S BIKE WORKS

    2014 SG Cam choices?

    Guys not trying to spam but we have money back guarantee on our cams If you buy or 565 or 580 and or not happy send them back as long as there's no damage to cams we will refund you. You have 2 weeks from purchase to send back. Nobody offers a deal like this. Quality Performance Respect Thanks FD
  12. DRAGO'S BIKE WORKS

    124 Dragos Higher output motor

    This is a kit heads Pistons pushrods flanges etc. 2800.00 Std with us not doing any head work Then we have to re balance crank for Pistons. Now if you have us build it from ground up that's the best time to do that
  13. DRAGO'S BIKE WORKS

    124 Dragos Higher output motor

    No not on this to much compression. we would build you a turbo 124 engine for the Trask system
  14. DRAGO'S BIKE WORKS

    124 Dragos Touring motor

    sorry wrong post here
  15. DRAGO'S BIKE WORKS

    124 Dragos Higher output motor

    We can push them. We also can build them as 126 with b2 heads out here over 165HP plus easy
Top